ExAm
September 2nd, 2008, 07:15 PM
My entry for the sidearm competition. Newest work at top.
Latest renders:
16634 tris
A short explanation on how this is supposed to work:
The user attaches the magazine, then pulls the ring on the magazine, releasing the bullets into the feed, where they are picked up by the sprocket and rotated into firing position in succession. The bolt cycles, pushing each round into the chamber from the sprocket, and recoiling, returning the spent casing to the sprocket and rotating the next round into position. Spent casings exit the sprocket on the other side via the ejection port. Additionally, there is an ambidextrous charging handle on the opposite side of the weapon.
The magazine spring is wound for easy loading using the lever seen on its front, which is connected to the spring by a small gearbox whose gears spin in opposing directions, fully winding the spring clockwise when the lever is turned 180 degrees counterclockwise into its "load" position. The magazine is also fitted with carry handles.
http://i231.photobucket.com/albums/ee6/TheExAm/roflol.jpg
http://i231.photobucket.com/albums/ee6/TheExAm/blankgunlulz.jpg
http://i231.photobucket.com/albums/ee6/TheExAm/magazine.jpg
http://i231.photobucket.com/albums/ee6/TheExAm/altcharge.jpg
Wires:
http://i231.photobucket.com/albums/ee6/TheExAm/wire1.jpg
Ditched the belt for linkless mag feed. The mag's going to be a drum next time you see it.
http://i231.photobucket.com/albums/ee6/TheExAm/Picture214.png
Belt and sprocket system...
http://i231.photobucket.com/albums/ee6/TheExAm/Picture202.png
The model's coming along...
http://i231.photobucket.com/albums/ee6/TheExAm/Picture199.png
http://i231.photobucket.com/albums/ee6/TheExAm/Picture200.png
I love this no poly limit business. I modeled the rifling on the barrel :awesome:
Continuing the "putting belted ammunition in things that should never have them" theme...
http://i231.photobucket.com/albums/ee6/TheExAm/pdw.jpg
Cartridges are pulled through by a rotor and loaded into the chamber by the bolt, which strips the linkage (somehow), fires the cartridge, and recoils backward, returning the casing to the rotor, which rotates when the bolt is fully returned, bringing the next cartridge into position and depositing the spent cartridge out of the gun on the other side.
Latest renders:
16634 tris
A short explanation on how this is supposed to work:
The user attaches the magazine, then pulls the ring on the magazine, releasing the bullets into the feed, where they are picked up by the sprocket and rotated into firing position in succession. The bolt cycles, pushing each round into the chamber from the sprocket, and recoiling, returning the spent casing to the sprocket and rotating the next round into position. Spent casings exit the sprocket on the other side via the ejection port. Additionally, there is an ambidextrous charging handle on the opposite side of the weapon.
The magazine spring is wound for easy loading using the lever seen on its front, which is connected to the spring by a small gearbox whose gears spin in opposing directions, fully winding the spring clockwise when the lever is turned 180 degrees counterclockwise into its "load" position. The magazine is also fitted with carry handles.
http://i231.photobucket.com/albums/ee6/TheExAm/roflol.jpg
http://i231.photobucket.com/albums/ee6/TheExAm/blankgunlulz.jpg
http://i231.photobucket.com/albums/ee6/TheExAm/magazine.jpg
http://i231.photobucket.com/albums/ee6/TheExAm/altcharge.jpg
Wires:
http://i231.photobucket.com/albums/ee6/TheExAm/wire1.jpg
Ditched the belt for linkless mag feed. The mag's going to be a drum next time you see it.
http://i231.photobucket.com/albums/ee6/TheExAm/Picture214.png
Belt and sprocket system...
http://i231.photobucket.com/albums/ee6/TheExAm/Picture202.png
The model's coming along...
http://i231.photobucket.com/albums/ee6/TheExAm/Picture199.png
http://i231.photobucket.com/albums/ee6/TheExAm/Picture200.png
I love this no poly limit business. I modeled the rifling on the barrel :awesome:
Continuing the "putting belted ammunition in things that should never have them" theme...
http://i231.photobucket.com/albums/ee6/TheExAm/pdw.jpg
Cartridges are pulled through by a rotor and loaded into the chamber by the bolt, which strips the linkage (somehow), fires the cartridge, and recoils backward, returning the casing to the rotor, which rotates when the bolt is fully returned, bringing the next cartridge into position and depositing the spent cartridge out of the gun on the other side.