Heres my current setup, although its changing in a few weeks (moving out again)
heh, taken with mobile phone
I finally got around to mounting my fans.
Since I had to drill extra holes into the fans to allow me to mount them to the case, for a long time they were in the same place - one attached by 3M command strips, the other propped up by a box of jelly. Since the holes the in the case were too large for normal screws, I had to get some thumb screws. Cool solution I thought :3
Need to clean my case though :C Originally there was a plastic cover surrounding that metal mesh you can see on the left of the bottom pic, which caused a build up of crap over the years. I might put that mesh back on, but the holes are so damn small it looks like they'd reduce the airflow quite a bit.
Last edited by Timo; August 31st, 2009 at 06:35 PM.
You should also reverse the orientation of those side fans, the top one is blowing in on your CPU fan and the bottom one is blowing out. You want that reversed so the top one is blowing out to assist your CPU fan, and the bottom one is bringing in cool air (hot air rises and all that).
Unless those are weird fans, usually the four supports to the middle section are placed on the direction the fan is blowing.
There are currently 3 users browsing this thread. (0 members and 3 guests)
Bookmarks